|
|
|
| |
 |
|
| |
A. Overview
This product is a multifunctional machine, the main function
of a radio has AM/SW choose, clocks, public address microphone,
external solar charging, an external electrical charge, electricity
instructions, multiple output voltage, flashlight lighting, over
current protection , The power switch, the output voltage input
conversion, an external antenna and so on, see the following:
B. Charging Help
Open the rear cover and remove the microphone, add
to the battery and connect the power cord (red (+) and black (-)),
open “power” and power indicator light! Then put solar panels
into the sunlight outside a local and installed. Plug the power
cord and then insert "SOLAR PANEL 1" or "2"
interface. Then hit “BATTERY SELECTOR” to "INTERNAL",
at this time charge the battery for the solar panels on board.
If the "BATTERY SELECTOR" switch hit to the "EXTERNAL"
now is for "12 V-VOLT" power input.
 |
| 1,3 External jack |
14 Microphone volume control |
| 2,4,5,6 Interface power |
15 Screen time |
| 7 Fuse |
16 Minute button , 17 Hour button |
| 8 Power on/off |
18,19 Solar interface |
| 9 Battery status |
20 AM/SW choose |
| 10 Internal(on) External(under) |
21 tuning |
| 11 Cathode Enter |
22 Volume |
| 12 Anode Enter |
23 Enter power:5W |
| 13 Microphone interface |
24 LED Enter power:2*2W |
| |
|
| |
Description |
Size |
Solar panels introduction
|
Rated power:12W Rated voltage:18V Margin of
error:±5% use life:25years |
330mm(L) x 315mm(W) x 35mm(H) 3kg/pcs |
| Battery |
RB-FM-12V-5.0Ah Stand-by use:13.5-13.8V Cycle-use:14.4-14.7V
1.5A(MAX)
|
151mm(L)x65mm(w)x94mm(H) 1.65kg/pcs |
| lights introduction |
Open the lid back, take out the lights and plug
into "LED1" or" LED2" lights(Power consumption:0.25W) |
|
| Microphone |
Open the lid back, take out the microphone and
plug into "MIC" it. Turn on the microphone and control
the start work |
|
| Installation instructions |
Open the lid back, take out the microphone and
the battery, install the battery with the side with letters
facing yourself |
|
| The level of inward installation：Link the red
(+) and black (-) wire of the power respectively with the
red (+) and black (-) wire of the battery. |
| Content |
GW: 6.5kg NW: 5.5kg 40"Cabinets=1600CN
box |
460mm(L)*320mm(W)*245mm(H) |
|
| |
|
